ECB,
Strataflex, SAM3 and Super SAM meet ANSI A118.12 for Crack
Isolation and
A118.10 for Waterproofing. Versatile "No Mesh/No Mess"
SubSeal
Liquid
Waterproofing Membrane Also Meets A118.10.
NAC: Home
of the Original Sheet-Applied,
Self-Adhering, Thin-Bed Crack Isolation Membrane
National
Applied Construction Products doesn't just manufacture sheet-applied,
self-adhering, thin-bed crack isolation membranes: it
invented the technology. Introduced nearly 25 years ago
to protect decorative floors from failure caused by lateral
substrate movement, the original ECB
Anti-Fracture Membrane has since been joined by
Strataflex for Waterproofing, and SAM3
or Super SAM for Sound Abatement.
All four membranes are easy to install and allow for same
day tile setting. They each perform efficiently and cost effectively
over a variety of substrates and are compatible with radiant-heat
and tile warming systems. Here are just a few of the reasons
they're still the membranes of choice for sheet-applied installations:
Fracture-free
since 1983 with millions of square feet installed, NAC Membrane
Systems are time-tested performers with a proud history
of success.
NAC
Membranes meet ANSI A118.12 Crack Isolation Spec, A118.10
for waterproofing and E492 for sound abatement.
NAC
Membranes are the first proven effective against Moisture
Vapor Transmission (MVT) 10#/1000SF/24HRS. They also serve
as impermeable barriers to under floor hazards like radon,
mold and asbestos.
NAC
Membranes offer an unsurpassed 3/8" lateral crack bridging
protection. Higher rubber content and proprietary fillers
assure maximum elasticity while non-reemulsifiable primers
assure a lifetime grip between membrane and substrate.
NAC
is backed by FREE free-tech support and the best warranties
available in the industry.
NAC Membranes have earned national specifications including
McDonald's, Macy's, Kohl's, JC Penney and Pier One Imports.
Major projects include:
ECB
was architect Santiago Calatrava's membrane of choice to protect
40,000 square feet of hydronically-heated marble at his famed
expansion of the Milwaukee
Art Museum. See our Major
Project List for a project near you!
We
invite you to explore our website. If you have any questions
or if we can provide you with additional information or a
distributor near you, please feel free to call us at 800.633.4622.
NAC
is a member of the Tile Council of North American (TCNA),
Materials & Methods Standards Association (MMSA), National
Tile Contractors Association (NTCA) which it also serves as
a member of the technical committee, World Floor Covering
Association (WFCA), US Green Building Council (USGBC) and
Ceramic Tile Distributors Association (CTDA). We also offer
courses approved by the American Institute of Architects Continuing
Education Program.