Contact

Phone: 330-644-3117/800-633-4622   Fax: 330-644-3557    Email:   info@nacproducts.com

© 2018 National Applied Construction Products, Inc.

NAC Kits

NAC offers a two all-in-one kits to assist in the installation of membrane where strip applications are required.  The Extreme Deck Kit and two rolls of Stratflex sheet membrane (available seperately) provides 

the necessary components to waterproof a 300 sqft exterior deck.

ECB® Kit

 

The best way to ensure maximum fracture-free protection for tile, stone and other hard surface flooring is with full floor coverage of 36” ECB® membrane.  

 

But what about isolating hairline fractures in substrates?

 

Strip applications of ECB® provide an alternative to full floor coverage and will protect hard surface flooring from isolated cracks. 

 

The ECB® Kit is designed for installations using tiles measuring 12" or less and will protect finished floors from lateral substrate movement up to 1/4".

 

The correct positioning of the tile is critical to the successful installation of any ECB® strip applications.

 

Only one side of each tile should be affixed to the subfloor. This will allow the subfloor to move in-plane while ECB® absorbs the stress of that movement. Tile should never be affixed directly to the subfloor on both sides of the membrane.

 

Packaging

The ECB Kit:

1 12" x 50' roll ECB®

1 Pint NAC TAC Primer

1 Primer Brush

1 Utility Knife

 

 

Large Tile Kit



Larger tiles demand the use of wider membrane applications to prevent substrate movement from disturbing the new tile installation.

 

The best way to ensure maximum fracture-free protection for tile, stone and other large-format, hard surface flooring is with full floor coverage of 36” ECB® membrane. 

 

The Large Tile Kit is a versatile alternative to the ECB® Kit that can accomodate large sized or small sized tile installations.  The 24” wide ECB® anti-fracture membrane can accommodate tiles up to 24” x 24” and provide protection up to 1/4" of lateral substrate movement.

 

The correct positioning of the tile is critical to the successful installation of any ECB® strip applications.

 

Only one side of each tile should be affixed to the subfloor. This will allow the subfloor to move in-plane while ECB® absorbs the stress of that movement. Tile should never be affixed directly to the subfloor on both sides of the membrane.

 

With any large tile installation, the cost of repair becomes a critical factor: the larger the tile, the higher the cost, even if only one tile breaks.

 

Packaging

The Large Tile Kit:

1 24" x 25' roll ECB®

1 Pint NAC TAC Primer

1 Primer Brush

1 Utility Knife

Extreme Deck Kit

 

The Extreme Deck System combines the stand-alone waterproofing products Strataflex sheet and SubSeal® liquid membranes to provide a durable, double layered defense from extreme heat and cold conditions ensuring lasting protection of exterior decks.

 

The Extreme Deck Kit, contains all of the companion products needed, when paired with two rolls of Stratflex sheet membrane, to provide a durable, double layered defense for exterior decks and balconies covering up to 300 sqft.

 

The thin, low-profile system is the perfect solution for low threshhold applications and allows for same day tile installation if no flood testing is required.

 

Packaging

The Extreme Deck Waterproofing Kit:

1 gallon of NAC TAC (blue) primer,

2 gallons of SubSeal® liquid waterproofing membrane,

1 roll of Seam tape 

6 PFI, 4 PFO fabric corners 

2 tubes of polyurethane sealant

 

Two 3'x50' rolls of Strataflex (sold seperately) will be necessary to complete the 300 sq.ft. system.